No, a Coalescer is not designed to handle heavy chip loads. The Z17 coalescer is engineered as a filtration device and primary function is to separate oil or other hydrocarbons from water or other liquids. It works by coalescing small droplets of oil into larger droplets, which can then be more easily separated and removed.
1. Enhanced CNC Coolant Life Dazzle Automated Coolant Systems are designed to optimize CNC coolant performance. By maintaining the ideal coolant concentration and temperature, these systems extend the lifespan of your coolant, reducing costs and waste in the long term. 2. Improved Operational Efficiency With Zebra Skimmers' Dazzle Automated Coolant Systems, you can elevate your
The temperature of a parts washer tank can vary depending on the specific type and model of the parts washer. Parts washer tanks are typically designed to operate at temperatures between 100-180 degrees Fahrenheit (38-82 degrees Celsius). The exact temperature range may also depend on the type of cleaning solution used in the parts washer.
Often, we are contacted with the following comments regarding a newly purchased Machinist Venturi Mixer. It's not working or mixing It's not drawing up Just water is coming out The primary reason for these issues we find is that modifications were made to the mixer or install instructions were not followed. Any deviation from our
Our naming convention is simple to follow. The -17 is the length of the tube for this unit. You can order the replacement tube on this website or call our support number. You will need to ZT8-17.
Yes, all motors used in our line of Tramp Oil skimmers (Disk, Belt and Tube) are manufactured in the United States and meet RoHS compliance. This helps reaffirm our commitment to our customers and the environment to provide a quality long term product to meet your skimming needs. Browse our full line of products
Yes, you would need to replace the foot and the belt assembly. For example, if you have a skimmer with an 8" footer and you want to move up to the next size you would ask for a BPF1-12 footer and corresponding belt. Please call customer service at 888-249-4855 and they will assist you
Remove discharge hose from output holding container or sump. Verify concentrate container’s breather hole is open. Verify that the check valve is free of debris.
Shut water ball valve off (check valve on end of standpipe is not rated to hold fluid under pressure). Check water ball valve for cracks or damage. If using a solenoid valve, install it on inlet before water supply (check valve on end of standpipe is not rated to hold fluid under pressure).
Low Concentrations or None at All Check the discharge hose. If you are NOT using the hose we provided, make sure you are using NO MORE than 40” of discharge hose, with a minimum UNINTERRUPTED ID of 1/2” for 3 gpm models, and 3/4” for 10 gpm models. Make sure that the hose has
Since 1994 Zebra Skimmers has built a reputation for providing the metalworking industry and other industries with oil skimmers and metalworking fluid management systems. Our reputation is built on strong customer service, expert technical know-how and delivering American-made, American quality products and solutions.
Business Information
27000 Richmond Road, Unit 1
Solon, OH 44139
Corporate Office: 888.249.4855
Product/Technical Information: 440.528.0699
Fax: 440.349.1211
Monday – Friday
8:00 AM – 5:00 PM
Eastern Standard Time
COPYRIGHT 2022 © Zebra Skimmers | Privacy Policy | Limitation of Liability | Returns and Refund Policy