The easiest way to start automatic mixing at your drum is using an economy mixer. Most effective for smaller shops where constant concentrations is required. Economy mixers allow for mixing and delivering metalworking fluids (coolant, cutting fluids).
14 metering tips for specific ratios (see below)
Maximum viscosity of 500 SUS
4.8 gpm (18 lpm) flow rate
48” intake tube w/check valve included
48” discharge tube included, max length (for longer delivery needs, please refer to the proportioning pump series)
Economy mixers are ideal for mixing and delivering Metalworking fluids (Coolant, cutting Fluids). It is the easiest way to start automatic mixing at your drum and is most effective for smaller shops where constant concentrations is required.
Mix Range %*
Part Number
GPM
Low
High
Max Delivery
Range psi
In**
Out
MIX05XMTK
4.8
.25
22.2
48"
25-75
3/4" GHT
1/2" NPT
MIX04XMTK
Set of 14 metering tips ranging from 0.2 to 22.2% and color coded.
Mixer Notations: * Economy Mixer is supplied with 14 various size tips within above range, ** Connection fittings to water source not supplied.
Tip Colors and PSI Ratings
Tip Color
Drill Size
Ratio
Approximate Concentration @ 40 psi
No tip
4.5:1
22.2%
Gray
30
5:1
20%
Black
40
6:1
16.7%
Beige
50
9:1
11.1%
Red
55
20:1
5%
White
57
24:1
4.2%
Blue
60
26:1
3.8%
Tan
65
31:1
3.2%
Green
70
50:1
2%
Orange
72
70:1
1.4%
Brown
74
90:1
1.1%
Yellow
76
100:1
1%
Purple
80
200:1
.5%
Pink
87
400:1
.25%
Coolants with SUS ratings greater than 500
In general, use a Proportioning Pump to mix coolants with viscosities greater than 500 SUS
![Zebra Skimmers Logo](data:image/svg+xml;utf8,<svg xmlns="http://www.w3.org/2000/svg" width="" height=""><rect width="100%" height="100%"><animate attributeName="fill" values="rgba(153,153,153,0.5)" dur="2s" repeatCount="indefinite" /></rect></svg>)
![Machinist Mixer](data:image/svg+xml;utf8,<svg xmlns="http://www.w3.org/2000/svg" width="500" height="500"><rect width="100%" height="100%"><animate attributeName="fill" values="rgba(153,153,153,0.5)" dur="2s" repeatCount="indefinite" /></rect></svg>)