Toll Free | 1.888.249.4855
Home » PRODUCTS » Machinist Mixers

Machinist Venturi Mixers

Part #: MIX0327

Proper fluid mixing provides superior emulsions resulting in consistent concentration values. Maintaining consistent concentration values extends sump and tool life while improving machined surfaces. It also provides a savings for raw material usage.

 

 

 

Description

Machinist mixers allow for consistent fluid mixing and provides superior emulsions resulting in consistent concentration values. Maintaining consistent concentration values in your coolant extends sump and tool life while improving machined surfaces. It also provides a savings for raw material usage.

  • Separate water shut-off valve
  • Machined from solid bronze casting with galvanized steel stand pipe
  • Maximum viscosity of 500 SUS
  • 40 inch discharge tube included (max length for delivery)
  • Maximum viscosity of 500 SUS
  • Fits drums, pails, or totes
  • Prevent tampering with the Mixer Lockout (#MIXXLOCK)

3 POINT ACCURACY USING FORCE-FLO™ TECHNOLOGY

  • Machined needle valve
  • Locknut below dial holds mixing reference
  • Standpipe check valve keeps mixing chamber loaded
Part Number GPM Low Percent High Percent Max Mix Ratio Range psi In Out
MIX0327 3 0 7 15:1 25-75 3/8" 1/2"
MIX03725 3 0 25 4:1 25-75 3/8" 1/2"
MIX1027 10 0 7 15:1 25-75 1/2" 3/4"
MIX10725 10 0 25 4:1 25-75 1/2" 3/4"

Our machinist mixers require a minimum pressure of 25 psi.

TEST METHOD
With a 5-gallon pail marked in gallons, fill the pail to the one gallon mark with the water valve fully opened. If you fill to the 1 gallon mark in 20 seconds there is enough pressure for our 3 gpm unit. If you fill to the 1 gallon mark in 6 seconds there is enough pressure for our 10 gpm unit.

WHEN USING COOLANTS WITH SUS RATINGS GREATER THAN 500
In general, use a Proportioning Pump to mix coolants with viscosities greater than 500 SUS. However, the 10gpm MIX1027 and the MIX10725 have proven up to the challenge in the field (contact us for details).

MIX03_10_Series-Profile

Economy-Mixer-Manual

Machinist_Mixer_Manual

MIX05-Tech-Parts

MIX05-Series-Profile

MIX03_10-Tech-Parts

Troubleshooting

Unboxing your Mixer

Title

Go to Top